- Jiangyin City Jiangnan Light Industrial Machinery Co., Ltd.
- Phone: +86-15261585261
- E-mail: email@example.com
- Fax: +86-510-86381535
- Tel: +86-510-86395222
JLM90x2-1300 model coating and laminating machine adopts electric, pneumatic and micro system and PLC control system. used for produce two kinds of roller materials together or double side coating for papers, Non woven and film.
JLM90x2-1300 model coating and laminating machine adopts electric, pneumatic and micro system and PLC control system.used for produce two kinds of roller materials together or double side coating for papers, Non woven and film. It include:
1. Unwinding system: 360°turnover pneumatic rollers magnetic blade controller.
2. Extruder & T-die.
3. Laminating system.
4. Online Rectify (EPC) and trimming system (inverter motor control). (used for paper. )
5. Rewinding system: guiding rolls rewinding type.
6. Others: PLC System (screen touch), automatic accounting meter.
B. Main Technical Parameters
1. Applicability: coating rolls base paper PET Film and Al foil.
2. Coating materials: PE, PP, EAA, EVA and so on.
3. Coating width: 700~1250mm.
4. Coating thickness: 0.010～0.2mm (single layer) depend on require.
5. Evenness degree of coating: error±3% (according to actually base materials).
6. Strength of peel off: 3-5N/30MM (according to the actual coating material).
7. Max extruding capacity: 180kg/h.
8. Machine design speed: 0-150m/min.
9. Unwinding system adopts 360 turnover double shafts work station,Tension is automatically controlled by magenetic blade technology, and tension feedback system. Rectify system adopts trolley type automatic pneumatic rectifying equipment (EPC), rectify journey: ±50mm.
10. Co-Extruder system : Pedestal for extruder adopts the light rail pedestal to move automatically from front to back, up and down. (2 set)
11. Screw & Barrel: φ 90mm, L=33D, screw material: 38CrMoAl.hardening and surface itrogen Treated (NT), enhanced double mixing type, with high capacity. (2 set)
12. Japan Omron digital intelligent temperature control system.
13. Loop of porcelain enamel for screw and barrel; (each zone with overload short circuit device).
14. Stainless steel inside heat die (each zone with overload short circuit device).
15. T-die: new type featheredge mould, material: 5CrNiMoV, hardening and tempering, deal with Chrome, having good tenacity, will not transmogrification after frequently using in high temperature.
16. The reduction gear box adopts high strength hard tooth surface reduction box with high obscuration and more reliable.
17. Winding adopts guiding roller rewinding. Automatic accounting and remind to change webs.
18. Max diameter of unwinding: 1000mm, max diameter of winding: 1000mm.
19. Pneumatic shaft for unwinding and winding: 3 inch (diameter: 76mm).
20. Total power: 100 kw. (cost 50kw/h during running).
21. Machine dimension(L×W×H): 8800mm×7700mm×3200mm.