- Jiangyin City Jiangnan Light Industrial Machinery Co., Ltd.
- Phone: +86-15261585261
- E-mail: firstname.lastname@example.org
- Fax: +86-510-86381535
- Tel: +86-510-86395222
Introduction 1) This machinery unit is suitable for the base material of film,adopts the rolling type for rewinder and unwinder. 2) Use LDPE and PP as raw material to compound with base material such as PET, EPS, OPP and Al foil after extrusion. 3) The finished product is widely used for packing...
1) This machinery unit is suitable for the base material of film,adopts the rolling type for rewinder and unwinder.
2) Use LDPE and PP as raw material to compound with base material such as PET, EPS, OPP and Al foil after extrusion.
3) The finished product is widely used for packing material, such as laminating pouch film, OPP complex film, air-cushion film, release paper and nonwoven. It is the ideal machine for single-layer film and double layers composite.
1)Extrusion laminating conating machinery for film
1, Adopt automatic temperature control, automatic feeding,high-precision die
2, Unwinder part,compound part and rewinder part are synchronized
3, Rewinder device uses automatic device, the larger diameter roll material has high rotation speed and Non-stop to change
4, Each unit is controlled by frequency conversion speed regulator and PLC.
5, Include corona,automatic correction device,product length counter and adjustable trimming device
Machine specification: 1200mm, 1350mm, 1450mm, 1700mm
Effective width: maximum 1100mm, 1250mm, 1350mm, 1600mm
Machine speed: 120m/min
Extruding machine: JLM-90 or JLM-100 extruder with principle of energy dynamic equilibrium for economizing on the energy
Extruding power: 37～45kw
Extrusion output: maximum 200kg/h or 280kg/h
Used resins: resin such as LDPE, PP, EVA, EAA, LLDPE, EMA, EMAA
Coating thickness: 10～40μm
Evenness of thickness: ≤±5%
Unwinder diameter: maximum ф1200mm
Base materials: paper(50～400g/m2), aluminum foil, CPE
Rewinder diameter: maximum ф1200mm (friction winder) or ф1200mm (central winder)
Sandwich unwinder diameter: maximum ф600mm
Tension control: automatic tension control
Electrical control mode: operated by MMI, extrusion thickness automatically controlled by computer, the whole machine is in linkage control state
Transducer: AC digit vector control frequency convertor (import)
Workshop requirement: Length 25m×Width 12m×Height 5m