- Jiangyin City Jiangnan Light Industrial Machinery Co., Ltd.
- Phone: +86-15261585261
- E-mail: email@example.com
- Fax: +86-510-86381535
- Tel: +86-510-86395222
Before use, check the main parts of the high-speed coating machine and fill with the lubricating oil. When inspecting the disassembling equipment, it is strictly forbidden to use unsuitable tools and unscientific operation methods; And inspection; if the high-speed coating machine is not used for a long time, all the bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic cover to cover the whole machine. After the work is completed, carefully clean the equipment, wipe the exposed friction surface and add lubricant.
Regular cleaning and inspection of high-speed coating machine parts should be carried out in time to remove hidden dangers. The use of the coater is done by a slitter and a cross cutter, so a high quality slitter and cross cutter are used. In short, the daily maintenance of the high-speed coating machine should be in place, and the standard line is smooth, clean, and clear in place to ensure that the sliding part of the equipment is in good condition.
Regular and irregular inspections should be stopped on the rotating parts of the high-speed coating machine, regular adjustments should be made, regular changes should be made, commutators should be carefully recorded to achieve the purpose of extending the service life of the equipment. Improve the technical quality and degree of the personnel who operate the coating machine. It is necessary to take special personnel to control the local operation, and no one can operate it without any permission.